函數法(多列匯總)--原創

歡歡

函數法(多列匯總)



提示輸入:

tmtony

歡歡,公式怎么寫啊,沒看到公式哦

tanhong

多列匯總不錯,只是沒看到函數哦

pureshadow

這是個3*3矩陣轉一列的內存數組公式.=IF((T(INDIRECT(TEXT(SMALL(ROW(A1:C3)*100+COLUMN(A1:C3),ROW(1:9)),"!r0c00"),))="")-COUNTBLANK(INDIRECT(TEXT(SMALL(ROW(A1:C3)*100+COLUMN(A1:C3),ROW(1:9)),"!r0c00"),)),N(INDIRECT(TEXT(SMALL(ROW(A1:C3)*100+COLUMN(A1:C3),ROW(1:9)),"!r0c00"),)),T(INDIRECT(TEXT(SMALL(ROW(A1:C3)*100+COLUMN(A1:C3),ROW(1:9)),"!r0c00"),)))
長了點,不過內存數組有它的好處,可以在外面再進行計算,非內存的要做到這點,只能加輔助列.

pureshadow

歡歡做的那種,可以自由增加的,之前也做過,只是函數一時找不到了(再讓我做一次.......頭會破 )
等找到了,一定拿出來

pureshadow

或者爪MM自己拿出來

業余愛好者

不用那么復雜吧

我也做一個

=IF(ROW()>COUNTA($AA),"",A1)&(IF(ROW()<=COUNTA($AA),"",IF(ROW()<=COUNTA($AB),INDIRECT("B"&ROW()-COUNTA($A:$A)),"")))&(IF(ROW()<=COUNTA($A:$B),"",IF(ROW()<=COUNTA($A:$C),INDIRECT("C"&ROW()-COUNTA($A:$B)),"")))

業余愛好者

原帖由 pureshadow 于 2008-6-17 20:26 發表
這是個3*3矩陣轉一列的內存數組公式.=IF((T(INDIRECT(TEXT(SMALL(ROW(A1:C3)*100+COLUMN(A1:C3),ROW(1:9)),"!r0c00"),))="")-COUNTBLANK(INDIRECT(TEXT(SMALL(ROW(A1:C3)*100+COLUMN(A1:C3),ROW(1:9)),"!r0c00"),)), ...

=IF(ROW()>COUNTA($AA),"",A1)&(IF(ROW()<=COUNTA($AA),"",IF(ROW()<=COUNTA($AB),INDIRECT("B"&ROW()-COUNTA($A:$A)),"")))&(IF(ROW()<=COUNTA($A:$B),"",IF(ROW()<=COUNTA($A:$C),INDIRECT("C"&ROW()-COUNTA($A:$B)),"")))

公式里怎么數據變成了表情了?

再來一次

還是不行,只好把文件也傳上來了


[ 本帖最后由 業余愛好者 于 2008-6-17 21:46 編輯 ]

pureshadow

禁用smiles就行了

pureshadow

相當不錯

[ 本帖最后由 pureshadow 于 2008-6-17 22:09 編輯 ]